HaloArray.png
Reclaimer - H4.png

EVA-class Mjolnir: Difference between revisions

From Halopedia, the Halo wiki

Line 88: Line 88:
===Halo 5: Guardians===
===Halo 5: Guardians===
'''Unlock''': Common [[REQ pack]]
'''Unlock''': Common [[REQ pack]]
*'''Helmet Description''': The EVA helmet can be paired with all milspec hardshell and mechanical counterpressure suits.
*'''Body Description''': Though EVA-class armor is fully compliant with the strictest UNSC specifications for vacuum-rated environment suits, Material Groups has continued to optimize safety and protective features relevant for combat in the harshest microgravity regimes.
*'''Body Description''': Though EVA-class armor is fully compliant with the strictest UNSC specifications for vacuum-rated environment suits, Material Groups has continued to optimize safety and protective features relevant for combat in the harshest microgravity regimes.
'''Available skins''': Hadfield, Leonov, Solovyev, and Zhigang<br>
'''Available skins''': Hadfield, Leonov, Solovyev, and Zhigang<br>

Revision as of 21:49, December 20, 2015

Help.png
This article does not meet the wiki's general standards and/or standards on layouts. You can help by cleaning this article.

Template:Armor Infobox The MJOLNIR Powered Assault Armor/V variant, more commonly known as Extra-Vehicular Activity Armor and usually referred to by the acronym EVA Armor, is a type of United Nations Space Command body armor. The EVA armor is a variant of the standard MJOLNIR Powered Assault Armor that specialized to improve survivability of Spartans when performing extra-vehicular activity in vacuum.[1][2]

Development and history

The Mk. VI MJOLNIR EVA variant.

GEN1

Template:Article Quote The MJOLNIR/V variant was developed and tested at a UNSC Low/Zero Gravity Testing Facility facility in Lister, Aigburth on Ganymede, integrating feedback gathered from the Summa Deep Space Incident. The V variant for the Mark IV still required a T-PACK for maneuvering in zero gravity.[1] The Mark VI MJOLNIR/V variant focuses on increasing exo-atmospheric endurance and improving mobility in zero gravity without the original use of back thrusters.[2]

GEN2

Template:Article Quote One of a few MJOLNIR variants that remained under the Materials Group contract after the Human-Covenant War, the GEN2 EVA armor is similar to its GEN1 counterparts in its design. It remains the most effective option for Spartan personnel engaged in exoatmospheric and zero-gravity scenarios. It was tested in Swanbourne, Australia on Earth.[3]

In-game information

Halo 3

Helmet

Unlock: Unlock Campaign Complete: Normal achievement.

  • Description: The Mjolnir/V variant was developed and tested at UNSC facilities in Lister, Aigburth on Ganymede, integrating feedback gathered from the Summa Deep Space Incident.

The EVA armor's helmet is aesthetically similar to the Semi Powered Infiltration (or SPI) armor's helmet. The visor is smaller than the Mark V variant. However, the rim from the jaw down to the chin is thinner, including the breathers, and the back of the head has a quarter-sphere shape. The helmet is also much more rounded than the SPI helmet. The helmet may have its characteristic visor for complete field of vision during space operations. It vaguely resembles the Security helmet, as they both share a very large visor. Because of this, it has been dubbed the "Fish Bowl" and the "Sniper Magnet" by some gamers due to the prominent, brightly colored, spherical shape of its visor.

Shoulder pauldron

Unlock: Complete The Ark level on Normal, Heroic, or Legendary difficulty.

  • Description: Developed at the UNSC Low/Zero Gravity Testing Facility on Ganymede, the Mjolnir/V variant focuses on increasing exoatmospheric endurance and improving mobility in zero gravity.

The shoulder pauldrons are larger than the standard MJOLNIR plates and feature a long attachment to their center, another similarity to the SPI armor, which could be radios. The pauldrons also cover more surface area than other shoulder pieces.

Chest

Unlock: Complete Tsavo Highway on Normal, Heroic, or Legendary difficulty.

  • Description: In developing the Mjolnir Mark VI Powered Assault Armor/V variant, emphasis was placed on increasing exoatmospheric endurance and improving mobility in zero gravity without the use of thrusters.

The chest plate is a seemingly standard MJOLNIR chest plate set with a small and minor attachment. The attachment consists of a small metal plate connected to a piece of black alloy that has several unknown equipment pieces set into it. It has been speculated that the compartment on the chest plate holds a cable that could be attached to docking ports so that a SPARTAN-II does not drift into space.

Halo: Reach

Helmet

The MJOLNIR V [V] variant was developed and tested at the UNSC facilities in Lister, Aigburth, Ganymede.
Base price: 30,000 cR, Major

  • Description: The EVA helmet was developed using data gathered from the Summa Space Incident.

CNM price: 7000 cR, Major

  • Description: Command network module; standard issue to UNSC Special Forces unit commanders.

UA/HUL[3] price: 15,000 cR, Lt. Colonel

  • Description: Up-armored variant with hardened 3rd generation uplink module for MILINT acquisition.

[C] Base price: 120,000 cR, Commander (EVA base required)

  • Description: The EVA helmet was developed using data gathered from the Summa Space Incident.

[C] CNM price: 25,000 cR, Commander

  • Description: Command network module; standard issue to UNSC Special Forces unit commanders.

[C] UA/HUL[3] price: 140,000 cR, Commander

  • Description: Up-armored variant with hardened 3rd generation uplink module for MILINT acquisition.

The Mk. V variant features a large visor. It bears a striking visual similarity to the SPI helmet. A second EVA helmet, EVA [C], has a skull pattern engraved on the visor. The [C] likely stands for "Custom" or "Carved".

Two upgrades are available for the helmet, the first adds a Command Network Module on the left side (CNM), and the second adds an Up-Armor plate with a Hardened Uplink Module-3rd Generation on the right side (UA/HUL[3]).

Two upgrades are available for the [C] variant of the helmet as well, the first adds a Hardened Uplink Module on the right side (incorrectly called CNM, should be designated HUL), and the second adds an Up-Armor plate with a Hardened Uplink Module on the right side (incorrectly called HUL[3], should be UA/HUL). These errors likely have something to do with the [C] variant's attachments having the same names and descriptions as the standard variant.

Shoulder pauldron

Template:Article Quote Price: 3,000 cR, Corporal

The shoulder pauldrons are large and bulky, several inches thick. The attachments on the sides of the pauldrons found in Halo 3 appear to be built into them, instead of hanging out.

Halo 4

Unlock: Achieve Spartan Rank 27

  • Description: Classic variant of Mjolnir Gen1 designed for extra-vehicular activity operations.

Available skins: BRCH(Breach)

The helmet has a much less curved surface, with a large dip half way down its surface, and a more flared section at the bottom.

Halo 5: Guardians

Unlock: Common REQ pack

  • Helmet Description: The EVA helmet can be paired with all milspec hardshell and mechanical counterpressure suits.
  • Body Description: Though EVA-class armor is fully compliant with the strictest UNSC specifications for vacuum-rated environment suits, Material Groups has continued to optimize safety and protective features relevant for combat in the harshest microgravity regimes.

Available skins: Hadfield, Leonov, Solovyev, and Zhigang
Hadfield Unlock: Uncommon REQ pack
Leonov Unlock: Ultra Rare REQ pack
Solovyev Unlock: Rare REQ pack
Zhigang Unlock: Ultra Rare REQ pack

Trivia

Gallery

Normal Gallery

Halo 5: Guardians REQ Cards

Halo 5:Guardians armor skins=

List of appearances

Sources

  1. ^ a b Halo: Ghosts of Onyx, page 57
  2. ^ a b Halo 3 armor description
  3. ^ Waypoint: EVA