Armor-piercing round

There is more information available on this subject at Armor-piercing round on the English Wikipedia.

This article does not have enough inline citations and/or does not adhere to the proper citation format. You can help Halopedia by adding citations.

Armor-piercing rounds, colloquially known as AP rounds, are the type of ammunition designed to penetrate armor.

Overview

Armor piercing rounds are used to penetrate hardened, armored targets such as ballistic vests, vehicle armor, concrete, tanks, and other defenses, depending on the caliber of the round. AP rounds are tipped with a hard metallic cap. The cap can be made from tungsten, steel, a carbide of some sort, or even depleted uranium. This allows the bullet to pierce through armor, as the projectile stays intact because the tip of the round does not deform enough to slow it down dramatically. Armor piercing ammunition is designed to dump almost all of its energy directly into the target, causing massive trauma and kinetic energy damage.

The disadvantage of AP rounds is that they perform poorly against energy shields, as the shielding defeats the piercing qualities of the bullet. An AP round must thus rely simply upon its kinetic energy to deplete the shields before it can damage the shielded enemy. Large rounds, such as the 12.7x99mm Armor-Piercing and the 14.5x114mm, perform well under these conditions. However, smaller AP rounds, such as the M118 7.62x51mm and the M634 9.5x40mm, are ineffective unless used in large quantities.

List of appearances

• Halo: The Fall of Reach (First appearance)
• Halo: The Flood (Mentioned only)
• Halo: Contact Harvest
• Halo: Ghosts of Onyx
• Halo: Glasslands
• Halo: Last Light (Mentioned only)

This section needs expansion. You can help Halopedia by expanding it.

See also

• High explosive ammunition