M6C magnum: Difference between revisions

26 bytes removed ,  14 years ago
→‎Design Details: see previous sentence
(Undo revision 971761 by 75.165.170.192 (talk))
(→‎Design Details: see previous sentence)
Line 32: Line 32:
The M6C Magnum Sidearm is a short-medium range [[UNSC]] handgun that was distributed to members of the [[UNSC Marine Corps]], particularly members of vehicular crews.  This model has been up-sized to be used by Spartan’s in Mjolnir armor. Even though the Spartan issue pistols are larger than the standard-issue variants (~117%) they can still share magazines. The M6C is a semi-automatic, recoil-operated, magazine-fed handgun. It has DA, or double-action only trigger and fires the M228 12.7mmx40mm SAP-HP round (Semi-Armor Piercing, High Penetration) from a 12 round magazine. It has a considerably high rate of fire (6 rounds/sec or 360 rounds/min) with a limited maximum effective range, being able to hit a target accurately at only about 20 meters. The M6C is considered to be the weaker of the currently usable M6-series models in that it has reduced accuracy, a shorter effective range, and lower efficiency rate against shielded, armored, and soft targets.
The M6C Magnum Sidearm is a short-medium range [[UNSC]] handgun that was distributed to members of the [[UNSC Marine Corps]], particularly members of vehicular crews.  This model has been up-sized to be used by Spartan’s in Mjolnir armor. Even though the Spartan issue pistols are larger than the standard-issue variants (~117%) they can still share magazines. The M6C is a semi-automatic, recoil-operated, magazine-fed handgun. It has DA, or double-action only trigger and fires the M228 12.7mmx40mm SAP-HP round (Semi-Armor Piercing, High Penetration) from a 12 round magazine. It has a considerably high rate of fire (6 rounds/sec or 360 rounds/min) with a limited maximum effective range, being able to hit a target accurately at only about 20 meters. The M6C is considered to be the weaker of the currently usable M6-series models in that it has reduced accuracy, a shorter effective range, and lower efficiency rate against shielded, armored, and soft targets.


The M6C uses the short recoil principle. This means that the trigger needs to be pulled after every shot for the next round to be fired. Because it is semi-automatic, the gun will cock itself after every shot due to recoil and will continue to do so until the magazine is empty. The recoil comes from the gases of the rounds fired. The gases force the slide, located on the top of the gun, backward. The slide not only absorbs the force of the gases but it also uses the force to eject spent casings out of the ejection port and load new rounds into the chamber. It also re-cocks the gun. Of course, before the first round can be fired, the round must be chambered. This is done first by inserting a magazine with ammunition into the grip of the weapon and second by pulling the slide back completely and letting it launch forward, chambering a round on the way. There is a small, red rectangular box on the flat back of the slide that protrudes out slightly when the weapon is cocked. Once this is done, the safety, located at the back of the slide on both sides, must be switched off or the weapon will not fire. Once all the rounds have been spent, the slide catch, a rectangular lever located above the trigger, is forced upward and “catches” the slide by a little notch. To reload, the empty magazine must be removed and this is done by using the magazine release button which is located on the grip. Once the empty mag is out, a fresh one can be inserted. Once the fresh mag is inserted, the slide catch is pressed downward and the slide chambers a round.
The M6C uses the short recoil principle. This means that the trigger needs to be pulled after every shot for the next round to be fired. Because it is semi-automatic, the gun will cock itself after every shot due to recoil and will continue to do so until the magazine is empty. The recoil comes from the gases of the rounds fired. The gases force the slide, located on the top of the gun, backward. The slide not only absorbs the force of the gases but it also uses the force to eject spent casings out of the ejection port and load new rounds into the chamber. Of course, before the first round can be fired, the round must be chambered. This is done first by inserting a magazine with ammunition into the grip of the weapon and second by pulling the slide back completely and letting it launch forward, chambering a round on the way. There is a small, red rectangular box on the flat back of the slide that protrudes out slightly when the weapon is cocked. Once this is done, the safety, located at the back of the slide on both sides, must be switched off or the weapon will not fire. Once all the rounds have been spent, the slide catch, a rectangular lever located above the trigger, is forced upward and “catches” the slide by a little notch. To reload, the empty magazine must be removed and this is done by using the magazine release button which is located on the grip. Once the empty mag is out, a fresh one can be inserted. Once the fresh mag is inserted, the slide catch is pressed downward and the slide chambers a round.


===Ammunition===
===Ammunition===