MA5 series: Difference between revisions

The MA5 series rifle is a bullpup rifle and is made of [[Titanium-A armor|Titanium-A alloy]]. The rifle is gas-operated with a rotating bolt and therefore must be cocked before the first shot can be fired. The charging handle used to chamber the round is situated on the left side of the rifle and moves during operation. Once the first round is fired, the gases from that round and those to follow impinge upon a gas piston, which pushes back the bolt carrier, rotating the bolt inside which unlocks it and extracts the spent brass from the chamber and ejects it. As the bolt carrier group is propelled forward, it chambers another round. This cycle continues until the magazine is empty. Once the magazine is empty, the charging handle must both be pulled back and locked or must be fully cycled after a fresh magazine is inserted to chamber the next round. The magazine itself is located at the butt of the rifle and the magazine release button is located above the magazine well and has an arrow pointing down toward the housing.