FSS-1000 Sabre

Sabre redirects here. For the SPARTAN-III team, see Team Saber.

YSS-1000 Sabre
Production information
Class:	Space fighter
Role:	Planetary/orbital defense
Technical specifications
Length:	24.6 meters (80.7 feet)
Width:	18.9 meters (62.1 feet)
Engine(s):	Two main engines and wing-mounted thrusters Detachable multi-stage booster rocket system
Armament:	Two M1024 ASW/AC 30mm MLA cannons Two ST/Medusa missile delivery systems
Crew:	One pilot One radar intercept officer
Chronological and affiliation
Era:	Human-Covenant War
Introduced:	2547
Affiliation:	UNSC Navy

The YSS-1000 Prototype Anti-Ship Spaceplane, commonly known as the Sabre, is a highly classified planetary defense starfighter used by the UNSC Navy in surgical orbital combat.

Specifications

Animated schematics of the Sabre fighter.

Design details

The YSS-1000 was designed to offer the UNSC a swift, versatile, and lethal defense interceptor that could engage Covenant forces in deep space and low orbit, preventing them from establishing a dominant position before ground engagements. It can be launched vertically from a ground-based launch platforms using a system of seven-stage detachable rockets to propel itself out of a planet's atmosphere into low orbit without the use of asynchronous linear-induction, nuclear technology, or other traditional means of surface-to-orbit transit. The Sabre also possesses powerful energy shielding technology, which covers all areas of the craft and quickly recharges when depleted.

The Sabre is designed for the dual purposes of peak acceleration and maneuverability in orbital combat, due in large part to a powerful afterburner system. This emphasis on speed and responsiveness enables the Sabre to perform feats that other human single ships cannot accomplish, and even allows the craft to compete favorably with the Covenant's more technologically advanced Type-31 Seraph fighter. The Sabre is capable of performing complex aileron rolls, Split S maneuvers, and Immelmann turns. The starfighter's engines are maintained and repaired by engine service modules in Sabre engineering facilities inside orbital refit stations. The MJOLNIR Powered Assault Armor/Aviator helmet is recommended for use by Sabre crew members.

Armament

The Sabre's armament includes twin M1024 30mm autocannons as well as twin-linked ST/Medusa missile pods; these missiles are capable of maintaining a lock on even fast-moving and highly evasive craft which could likely "shake" most projectiles. The Sabre's targeting computer can identify enemy contacts from a long distance, as well as show the distance to a target. The craft is intended for lethal encounters, not for simply disrupting or disabling targeted craft.

Operational history

The Sabre was developed by the Sabre Program in 2547, a top-secret project in which SPARTAN-B312 was a pilot at some point. However, the fighter proved too expensive to enter full production given the loss of critical Inner Colony manufacturing hubs to the Covenant and the shortage of skilled pilots, though most of these issues had been resolved by 2552. The craft's existence has been denied by three separate administrations and the program has remained secret throughout its existence.

The earliest known use of the Sabre was during a counter-insurgency operation on Mamore on May 10, 2552. SPARTAN-B312 demonstrated great skill in piloting the Sabre, thus gaining the approval of Colonel Urban Holland and resulting in the Spartan's assignment to NOBLE Team.

A Sabre fighter in the repair bay of Gamma Station.

Multiple Sabres were stored in launch facilities across the surface of the planet Reach, including the newest facility near Farkas Lake. In addition, the orbital platform Anchor 9 had several Sabres stored in its launch bays, and Gamma Station was equipped with repair facilities to service Sabre fighters. When the Covenant arrived in the Epsilon Eridani system in the summer of 2552, the UNSC replaced select F-41 Broadsword squadrons with Sabres to combat the Covenant. During the Fall of Reach, SPARTAN-B312 and Jorge-052 of NOBLE Team used a Sabre during Operation: UPPER CUT, in which multiple Sabres were used to board the Covenant corvette Ardent Prayer in order to use it to deliver a makeshift slipspace bomb to the Covenant supercarrier Long Night of Solace. Before assaulting the corvette, the Sabres were used to defend Anchor 9 against several Banshee interceptors, Seraph starfighters, and Phantom gunboats. SPARTAN-B312 and the other pilots were able to land on the corvette after disabling its engines and destroying its fighter escorts in order to use it and the slipspace drive to destroy the supercarrier. The mission succeeded but the Sabres were destroyed, as the strike team was unable to return to them due to damage to the corvette and was thus forced to abandon them.

Sabre production continued after the Fall of Reach, with only a few hundred craft total being built during the Human-Covenant War. In spite of this, the operational squadrons were able to rack up an impressive kill count. Had Reach not fallen to the Covenant, the UNSC planned to attach all Sabres to the UNSC Navy's remaining carriers and then deploy the fighters to lead ships in the most experienced squadrons and battle groups—organized in the specialist Orthrus Battle Group formation. Although the fighter never saw mass production due to its experimental nature, it remained in service at Office of Naval Intelligence facilities in the Sol system and other confidential locations following the Covenant War. However, upgrade packages inspired by the Sabre have been fitted to GA-TL1 Longsword‎s and Broadswords, notably including the energy shielding system applied to the latter.

Identified Sabres

• Bravo 029
• Echo 1
• Echo 2
• Echo 3
• Echo 4

Gameplay

The Sabre is usable only in the space combat segment of the level Long Night of Solace.

Like other vehicles in the Halo games, the Sabre is piloted from third-person view. The heads up display, located near the center of the screen, shows the weapon currently in use, thruster heat, as well as the hull and shield integrity of the Sabre. Enemy ships are identified by type and highlighted with a distance marker once the targeting reticle is moved on them. The HUD is slightly different depending on the weapon used at the time.

Pitch and direction change is controlled by the right thumbstick, while the left stick controls speed. However, if the player holds down the Right Bumper, a few changes are made. The auto-level functionality is disabled and left and right on the left thumbstick give full control over roll. This was a function that was initially always enabled and was cut during testing, only to be re-instated at the very last minute by holding the RB button down, and so is not mentioned in the manual, the official guide, or even within the game itself. The Sabre also has a boost function, which uses its wing-mounted thrusters. This fills up the thruster heat bar,which needs to cool down after continuous usage. A variety of maneuvers such as aileron rolls - often misidentified as 'barrel rolls' - and Immelmann turns can be performed by using the left bumper. The weapon in use can be switched between the machine guns and missiles with the Y button. The autocannons have an additional reticle leading the target, and the missiles can lock-on to enemy ships.

In Halo: Reach, crucial aspects of astrodynamics are overlooked for the sake of gameplay. For example, when thrust is cut, the Sabre no longer maintains a constant velocity. In reality, a spacecraft's momentum would propel it forward indefinitely as friction is not present.

Production notes

The origins of the Sabre lie in the development of Halo 2, with several early pieces of concept art depicting a Strike fighter with very similar visual aesthetics to the Sabre. This design similarity later carried over into the Jumpships in Bungie's later Destiny franchise. Isaac Hannaford concepted the Sabre design and came up with a number of visual explorations, the first of which was mocked-up in 3D and ultimately redesigned as it didn't provide much parallax from a player camera angle. The final vehicle was the first vehicle designed by Hannaford using 3D software.

Bungie initially experimented with adding the Sabre into multiplayer, though the vehicle only appears in the campaign level Long Night of Solace in the final game due to balance issues. The vehicle was later implemented alongside a number of new items onto the Forge pallettes of Forge World and Tempest for the inclusion of Halo: Reach in Halo: The Master Chief Collection.

Trivia

Browse more images in this article's gallery page.

• Like the Longsword, Shortsword and Broadsword, the Sabre is name after a bladed weapon.
• Despite being highly classified and officially non-existent, some sources erroneously describe the Sabre as being the primary defense fighter of the Inner Colonies.
• The Sabre launch sequence in Halo: Reach appears to have been inspired by NASA's Space Shuttle program, in both components and angles used for the cinematic. Several angles of the Sabre's launch sequence use similar camera angles seen during Space Shuttle launch, and the on-board cameras are used to examine foam loss on the external tank. The design of the Sabre's own external tank is somewhat based on that on the Shuttle, especially its orange color.
• It is possible for the player to ram the Sabre into an enemy Seraph or Banshee and destroy it. This will award the player the Splatter Medal. Interestingly, colliding with or ramming a Covenant drop pod will destroy a fully-shielded Sabre and kill the player, despite the pod's small size. The death will register as "Collision Damage" and the player will receive a "Collision Damage" kill, but will not receive a splatter medal.

Gallery

Animated gifs

• 

  Animated screen on the level Anchor 9 showing a schematic of the Sabre engine cart.

• 

  Animated screen showing the flow of air through the engines of the Sabre.

Screenshots

• 

  Detail of the Sabre emblem.

• 

  An angled view of the YSS-1000 Sabre starfighter.

• 

  The Sabre's port side M1024 cannon.

• 

  The Sabre's port side Medusa missile launch pod.

• 

  A Sabre attacks Covenant drop pods during Operation: UPPER CUT.

• 

  Bravo 029 docking with Anchor 9.

• 

  The Sabre's cockpit.

• 

  A rear view of the Sabre.

• 

  Inside a Sabre launch facility.

• 

  A Sabre, lifting off.

• 

  A front view of the Sabre's cockpit, with SPARTAN-B312 piloting and Jorge-052 co-piloting.

• 

  A Sabre after separating its first-stage components and fuel tanks.

• 

  The Sabre's heads-up display.

• 

  A Sabre and the UNSC Savannah assaulting the Covenant corvette Ardent Prayer.

• 

  An engine in an engine service module.

• 

  A Sabre's internal workings.

• 

  A Sabre being used on Forge World in Halo: The Master Chief Collection.

Concept art

• 

  A turnaround reference of the Sabre.

• 

  An early concept of the Sabre.

• 

  Early Sabre concept designs.

• 

  Several early conceptual explorations of the Sabre.

• 

  An early Sabre design, later scrapped after early 3D models didn't look good from the player camera angle.

• 

  An early Sabre design, later scrapped after early 3D models didn't look good from the player camera angle.

• 

  Conceptual views of the Sabre.

• 

  A conceptual model of the Sabre.

• 

  Concept art showing an early version of the Medusa missile pod.

• 

  Renders of the Sabre's rocket booster packs.

• 

  Early concept art of a Sabre being launched.

• 

  Concept art of a Sabre protecting Anchor 9.

• H2 StrikeFighter Concept.png

  A sketch of the scrapped Halo 2 "Strike Fighter", the Sabre's conceptual precursor.

List of appearances

• Halo: Reach (First appearance)
• Halo: Fleet Battles
• Halo Mythos (Mentioned only)
• Halo: Official Spartan Field Manual
• Halo: Outpost Discovery