Halopedia
Canon

EVA-class Mjolnir

Article Discussion
This article is about the variant introduced in Halo 3. For Kelly-087's armor introduced in Halo 5: Guardians, see HERMES-class Mjolnir.
EVA
GEN2
H5G - MJOLNIR EVA render.png
GEN1 Mark VI
HTMCC H3 EVA Crop.png
GEN1 Mark V
EVA-class Mjolnir from Halo: Reach armor permutation in Halo: The Master Chief Collection menu.
GEN1 Mark IV
  • Merch-McFarlane-HLKelly front.jpg
  • Merch-McFarlane-HLKelly left side.jpg
  • Merch-McFarlane-HLKelly back.jpg
  • Merch-McFarlane-HLKelly right side.jpg
Production overview

Manufacturer(s):

Materials Group[1]

Testing site(s):

Low/Zero Gravity Testing Facility (GEN1)[1][2]
WG/Facility 58-32/B5D (GEN2)[3]

Type:

MJOLNIR (GEN1)

MJOLNIR (GEN2)
MJOLNIR (GEN3) (Compatible)

Role(s):

Extra-vehicular activity

 

EVA-class Mjolnir (Extra Vehicular Activity), also known as the MJOLNIR Powered Assault Armor/V variant, is a MJOLNIR armor variant produced by the Materials Group. It is designed to improve the survivability of Spartans when performing extra-vehicular activity in the vacuum of space.[4][5]

GEN1 overviewEdit

“ The EVA helmet was developed using data gathered from the Summa Deep Space Incident.[6] ”

Design detailsEdit

The EVA variant for the Mark IV still required a T-PACK for maneuvering in zero gravity.[4] The Mark V EVA variant had a shielded visor.[1] The Mark VI EVA variant focuses on increasing exo-atmospheric endurance and improving mobility in zero gravity without the original use of back thrusters.[5] The helmet also contains a single-beam laser TEAMCOM system for communications.[4] The EVA helmet is capable of supporting AN/PCK-221 FARNDALE and AN/PCK-221 FARNDALE Command Network Modules, COURIER PEARL Hardened Uplink and Type C1 UA module.

Development historyEdit

As early as 2525 developmental Mjolnir permutations utilized physical architecture that would eventually be used for EVA.[7] The MJOLNIR/V variant was developed and tested at a UNSC Low/Zero Gravity Testing Facility facility in Lister, Aigburth on Ganymede, integrating feedback gathered from the Summa Deep Space Incident.[1][8][2]

The EVA variant has spawned numerous offshoots and is generally renowned for its reliability, ergonomics, and modularity— features to which the design's enduring popularity is often attributed. The GEN1 EVA helmet remained popular as late as 2558 and could still be requisitioned by Spartans for use with their next-generation GEN2 suits.[9] After the first wave of GEN2 systems, based on requests of veteran Spartan-II and Spartan-III operatives, the UNSC Ordnance Commission considered reassessing a refined and upgraded version of the Mark V EVA, specifically the customized suit worn by Emile-A239 complete with the death's head engraving on the visor. This led to the creation of the WRATH-class Mjolnir. In addition, the INDOMITABLE-class Mjolnir's right shoulder pad is based off the Mark V EVA shoulders.[10]

As late as 2560, the GEN1 EVA helmet and shoulders could still be requisitioned by Spartans, upgraded to be roughly equivalent to GEN3.[11]

UsageEdit

On 2531, Kurt-051 used the Mark IV variant of the armor on a mission alongside Blue Team in Construction Platform 966A.[4] A user of the Mark V variant of the armor was Emile-A239, who engraved a death's head on the visor.[1]

DesignsEdit

GEN2 overviewEdit

“ Classic variant of MJOLNIR GEN1 designed for extra-vehicular activity operations.[13] ”

Design detailsEdit

The GEN2 EVA armor is similar to its GEN1 counterparts in its design. This variant's helmet uses an open-view visor system typical of EVA configurations. It has 59-L20 Aureole braces in the helmet for awareness improvement.[3] The helmet can also be paired with all milspec hardshell and mechanical counterpressure suits.[14]

The slim-contoured chest plate lowers physical profile dramatically. This variant also uses larger pauldrons than previous models.[3]

Development historyEdit

Due to their long-standing history of investment Materials Group retained the production rights after the Human-Covenant War. It remains the most effective option for Spartan personnel engaged in exoatmospheric and zero-gravity scenarios. It was tested in WG/Facility 58-32/B5D.[3]

Though EVA-class armor is fully compliant with the strictest UNSC specifications for vacuum-rated environment suits, Material Groups has continued to optimize safety and protective features relevant for combat in the harshest microgravity regimes.[14]

UsageEdit

Spartan Kelly-087 used this armor during Operation: RETRIBUTION on December 2553.[15]

DeviationsEdit

  • HERMES-class Mjolnir worn by Kelly-087.

In-game informationEdit

Halo 3 - GEN1 Mark VIEdit

The EVA armor's helmet is aesthetically similar to the Semi Powered Infiltration (or SPI) armor's helmet. The visor is smaller than the Mark V variant. However, the rim from the jaw down to the chin is thinner, including the breathers, and the back of the head has a quarter-sphere shape. The helmet is also much more rounded than the SPI helmet. The helmet may have its characteristic visor for complete field of vision during space operations. The chest plate is a seemingly standard MJOLNIR chest plate set with a small and minor attachment. The attachment consists of a small metal plate connected to a piece of black alloy that has several unknown equipment pieces set into it.

In the Halo: The Master Chief Collection edition of Halo 3, the EVA armor (like all original Halo 3 permutations) is unlocked by default.

Helmet Description Unlock requirements
(Halo 3) 		Unlock requirements
(Halo: MCC)
 
EVA 		Helmet: The Mjolnir/V variant was developed and tested at UNSC facilities in Lister, Aigburth on Ganymede, integrating feedback gathered from the Summa Deep Space Incident. Unlock Campaign Complete: Normal achievement. Unlocked by default.
Shoulder: Developed at the UNSC Low/Zero Gravity Testing Facility on Ganymede, the Mjolnir/V variant focuses on increasing exoatmospheric endurance and improving mobility in zero gravity. Complete The Ark level on Normal, Heroic, or Legendary difficulty.
Chest: In developing the Mjolnir Mark VI Powered Assault Armor/V variant, emphasis was placed on increasing exoatmospheric endurance and improving mobility in zero gravity without the use of thrusters. Complete Tsavo Highway on Normal, Heroic, or Legendary difficulty.
MCC: EVA variants emphasize improved mobility and endurance in zero gravity, without the use of thrusters. N/A

Halo: Reach - GEN1 Mark VEdit

The Mark V variant features a large visor and bears a striking visual similarity to the SPI helmet. A second EVA helmet, EVA [C], has a skull pattern engraved on the visor. The [C] likely stands for "Custom" or "Carved". The HUL attachments to the EVA[C] helmet appear to be mislabeled: it is mislabeled as CNM in the first upgrade, and then mislabeled as HUL[3] in the second upgrade. These errors are likely related to the [C] variant's attachments having the same names and descriptions as those of the standard variant. The shoulder pauldrons are large and bulky, being several inches thick. The attachments on the sides of the pauldrons found in Halo 3 appear to be built into them, instead of hanging out.

All EVA armor types can be unlocked in the Halo: Reach's Armory through the game's purchase system via the use of cR. In Halo: The Master Chief Collection, the EVA set is attainable in the Season 1: Noble progression system.

Helmet Description Unlock requirements
(Halo: Reach) 		Unlock requirements
(Halo: MCC)
 
EVA 		The MJOLNIR V [V] variant was developed and tested at the UNSC facilities in Lister, Aigburth, Ganymede.

The EVA helmet was developed using data gathered from the Summa Space Incident.

  Major, 30,000 cR Series 1, Tier 51 (  1)
 
EVA (CNM) 		Command network module; standard issue to UNSC Special Forces unit commanders.   Major, 7,000 cR Series 1, Tier 52 (  1)
 
EVA (UA/HUL[3]) 		Up-armored variant with hardened 3rd generation uplink module for MILINT acquisition.   Lieutenant Colonel, 15,000 cR Series 1, Tier 58 (  1)
 
EVA[C] 		The MJOLNIR V [V] variant was developed and tested at the UNSC facilities in Lister, Aigburth, Ganymede.

The EVA helmet was developed using data gathered from the Summa Space Incident.

  Commander, 120,000 cR (Purchased EVA helmet) Series 1, Tier 70 (  1)
 
EVA[C] (CNM)[Note 1] 		Command network module; standard issue to UNSC Special Forces unit commanders.   Commander, 25,000 cR Series 1, Tier 70 (  1)
 
EVA[C] (UA/HUL[3])[Note 1] 		Up-armored variant with hardened 3rd generation uplink module for MILINT acquisition.   Commander, 140,000 cR Series 1, Tier 70 (  1)
  
EVA shoulders 		Developed at the UNSC's Low/Zero Gravity Testing Facility on Ganymede.   Recruit, 3,000 cR Series 1, Tier 36 (  1)

Halo 4 - GEN2Edit

EVA was one of the armor permutations to return, albeit completely redesigned for GEN2, in Halo 4. In The Master Chief Collection, the EVA set and its Breach (BRCH) skin variant are available by default.

Armor Description Unlock requirements
(Halo 4) 		Unlock requirements
(Halo: MCC)
 
EVA 		Description (H4): Classic variant of Mjolnir Gen1 designed for extra-vehicular activity operations. Obtained by achieving Spartan Rank 27. Unlocked by default.
Helmet description (MCC): Designed for extra-vehicular activity.
Shoulders description (MCC): Modular left/right spaulder from EVA-class armor.
Chest description (MCC): Maintains limited compatibility with GEN1 EVA modules.
 
EVA Breach (BRCH) skin 		Description (H4): Customized with BRCH armor skin. Complete the Hail of Death - Master commendation. Unlocked by default on Series 4: Reclaimer update.
Helmet description (MCC) EVA helmet customized with BRCH coating.
Shoulder description (MCC) EVA left/right spaulder customized with BRCH coating.
Chest description (MCC) EVA chassis customized with BRCH coating.

Halo 5: Guardians - Upgraded GEN1 and GEN2Edit

The Halo 4 design of EVA returns in Halo 5: Guardians. The helmet and body armour are unlockable through the Requisition system. The body armor includes the Recon chest and shoulders, the Ricochet forearms and Recruit legs. The GEN2 EVA set has four skins: Hadfield, Leonov, Solovyev, and Zhigang. The Memories of Reach update saw the addition of the WRATH helmet, based on Emile-A239's customized EVA helmet seen in Halo: Reach. The Classic Helmet REQ Pack added the GEN1 Mark V design from Halo: Reach.

Helmet Description Unlock requirements
 
EVA GEN1 (helmet) 		Few Mjolnir designs can claim to have spun off as many sub-variants as the EVA [GEN1]. The enduring popularity of the design is a testament to its reliability, ergonomics, modularity, and tradition of craftsmanship by Materials Group.
 
EVA GEN2 (helmet) 		The EVA helmet can be paired with all milspec hardshell and mechanical counterpressure suits. Common REQ card
 
EVA Hadfield (helmet skin) 		The EVA helmet can be paired with all milspec hardshell and mechanical counterpressure suits. Uncommon REQ card
 
EVA Solovyev (helmet) 		The EVA helmet can be paired with all milspec hardshell and mechanical counterpressure suits. Rare REQ card
 
EVA Leonov (helmet skin) 		The EVA helmet can be paired with all milspec hardshell and mechanical counterpressure suits. Ultra Rare REQ card
 
EVA Zhigang (helmet skin) 		The EVA helmet can be paired with all milspec hardshell and mechanical counterpressure suits. Ultra Rare REQ card
 
EVA GEN2 (body) 		Though EVA-class armor is fully compliant with the strictest UNSC specifications for vacuum-rated environment suits, Material Groups has continued to optimize safety and protective features relevant for combat in the harshest microgravity regimes. Common REQ card
 
EVA Hadfield (body skin) 		Though EVA-class armor is fully compliant with the strictest UNSC specifications for vacuum-rated environment suits, Material Groups has continued to optimize safety and protective features relevant for combat in the harshest microgravity regimes. Uncommon REQ card
 
EVA Solovyev (body skin) 		Though EVA-class armor is fully compliant with the strictest UNSC specifications for vacuum-rated environment suits, Material Groups has continued to optimize safety and protective features relevant for combat in the harshest microgravity regimes. Rare REQ card
 
EVA Leonov (body skin) 		Though EVA-class armor is fully compliant with the strictest UNSC specifications for vacuum-rated environment suits, Material Groups has continued to optimize safety and protective features relevant for combat in the harshest microgravity regimes. Ultra Rare REQ card
 
EVA Zhigang (body skin) 		Though EVA-class armor is fully compliant with the strictest UNSC specifications for vacuum-rated environment suits, Material Groups has continued to optimize safety and protective features relevant for combat in the harshest microgravity regimes. Ultra Rare REQ card

Halo Infinite - Upgraded GEN1Edit

The Mark V EVA helmet and its attachments are available for multiplayer Spartan armor customization on the Mark V [B] armor core in Halo Infinite. The EVA shoulders are available under the SAP series of shoulder pads.

Helmet Manufacturer Lore Rarity Unlock Requirements
 
EVA 		Materials Group Though particulars of the Summa Deep Space Incident remain classified at the highest level, the event was pivotal in the rapid development and improvement MJOLNIR EVA helmets. Legendary Season 01: Heroes of Reach Battle Pass level 10 (Premium)
 
EVA [C] 		Materials Group Though particulars of the Summa Deep Space Incident remain classified at the highest level, the event was pivotal in the rapid development and improvement MJOLNIR EVA helmets. Legendary Season 01: Heroes of Reach Battle Pass level 90 (Premium)
  
SAP/EVA 		Materials Group The shoulder latches are compatible with most UEG-standard spacesuit accessories. Rare
  • Left: Season 01: Heroes of Reach Battle Pass level 7 (Premium)
  • Right: Season 01: Heroes of Reach Battle Pass level 8 (Premium)
 
Blighter 		The Flood Spartan combat forms combine superhuman physiologies with further reinforcement by twisted Flood growths. Legendary Purchase "Blighter" Bundle from the Shop for 2,000 cR

AttachmentsEdit

TriviaEdit

  • The EVA helmet bears a resemblance to the Apollo Program's A7L PGA pressure helmet, which was called a "fish bowl" by the astronauts and support staff.
  • Through the Career section of Halo Waypoint, a player that has achieved Milestone 50 (3900 achievement points on all Halo titles) will receive an EVA helmet for their Xbox LIVE avatar.
  • The four skins for EVA in Halo 5: Guardians are named after astronauts Chris Hadfield, Alexey Leonov, Anatoly Solovyev, and Zhai Zhigang. Each astronaut is known for their EVA work: Leonov was the first person to perform a spacewalk; Solovyev holds the record for most spacewalks (16) and most time spent in EVA (over 82 hours); Hadfield and Zhigang were the first citizens of their countries (Canada and China, respectively) to perform spacewalks.

GalleryEdit

  Browse more images in this article's gallery page.

Halo 3Edit

  • Concept art of the Mark VI EVA armor.

  • Concept art of the Mark VI EVA armor.

  • The EVA armor during the Halo 3 Beta.

  • A Spartan-II clad in full EVA armor.

  • A Spartan-II clad in full EVA armor while dual wielding M7 SMGs.

  • A Spartan-II clad in full EVA armor while carrying a Missile Pod on Valhalla.

  • The EVA helmet and shoulders being used on Orbital.

  • A Spartan-II clad in full EV armor.

  • A Hellspartan wearing Mark VI EVA.

  • The EVA helmet for the Xbox LIVE Avatar from Halo Waypoint.

Halo: ReachEdit

  • Concept art of Emile-A239's customized EVA helmet.

  • The EVA base Mark V helmet.

  • The Mark V EVA[C] helmet.

  • A Spartan employing EVA helmet and right shoulder pauldron.

  • Mark V EVA helmet in Halo: The Master Chief Collection.

  • Mark V EVA helmet with CNM attachment in Halo: The Master Chief Collection.[Note 1]

  • An up-armored variant of the Mark V EVA helmet with HUL attachment in Halo: The Master Chief Collection.[Note 1]

  • EVA Mark V shoulder armor in Halo: The Master Chief Collection.

  • An EVA-clad Spartan wielding an M45 shotgun on Forge World.

Halo 4 and Halo 5: GuardiansEdit

  • Halo 4 concept art for EVA (top, mid-right).

  • Concept art of the EVA armor for Halo 4.

  • EVA in Halo 4.

  • A Spartan-IV wearing GEN2 EVA armor on Exile in Halo 4.

  • A Spartan-IV wearing GEN1 EVA in Halo 5: Guardians.

  • GEN2 EVA in comparison to Hermes in Halo 5: Guardians.

  • GEN2 EVA next to GEN1 Mark IV in Halo 5: Guardians.

  • GEN1 EVA, Wrath, GEN2 EVA, and Hermes in Halo 5: Guardians.

Halo 5: Guardians skinsEdit

  • Default skin.

  • Hadfield skin.

  • Solovyev skin.

  • Leonov skin.

  • Zhigang skin.

Halo InfiniteEdit

List of appearancesEdit

NotesEdit

  1. ^ a b c d The in-game options in Halo: Reach Armory erroneously refer to the standard HUL attachment on EVA[C] as "CNM" and "HUL[3]".

SourcesEdit

  1. ^ a b c d e Halo: The Essential Visual Guide, page 66
  2. ^ a b Bungie.net, Spartan Variant: E.V.A. (Retrieved on Jan 16, 2021) [archive]
  3. ^ a b c d Halo 4: The Essential Visual Guide, page 153
  4. ^ a b c d Halo: Ghosts of Onyx, page 49, 50, 57
  5. ^ a b Halo 3, Spartan Armor Customization: EVA Description "Developed at the UNSC Low/Zero Gravity Testing Facility on Ganymede, the Mjolnir/V variant focuses on increasing exoatmospheric endurance and improving mobility in zero gravity."
  6. ^ Halo: Reach, Spartan Armor Customization: EVA - Helmet Description "The EVA helmet was developed using data gathered from the Summa Deep Space Incident."
  7. ^ Halo Waypoint, About that Fall of Reach Animated Series Trailer (Retrieved on Jun 20, 2021) [archive]
  8. ^ Halo Infinite, Armor Hall: EVA - Helmet Description "Though particulars of the Summa Deep Space Incident remain classified at the highest level, the event was pivotal in the rapid development and improvement MJOLNIR EVA helmets."
  9. ^ Halo 5: Guardians, Armor Permutations: EVA GEN1 - Helmet Description "Few Mjolnir designs can claim to have spun off as many sub-variants as the EVA [GEN1]. The enduring popularity of the design is a testament to its reliability, ergonomics, modularity, and tradition of craftsmanship by Materials Group."
  10. ^ Halo Waypoint, Canon Fodder - Noble Intentions (Retrieved on Jun 20, 2021) [archive]
  11. ^ Halo Waypoint, Canon Fodder - Parallel Threads (Retrieved on Jun 25, 2021) [archive]
  12. ^ Amazon, McFarlane Toys - Product description (Retrieved on Feb 25, 2022) [archive]
  13. ^ Halo 4, EVA armor permutations
  14. ^ a b Halo 5: Guardians, Armor Permutations: EVA - Helmet Description "The EVA helmet can be paired with all milspec hardshell and mechanical counterpressure suits."
  15. ^ Halo: Retribution, chapter 14
  16. ^ Halo 5: Guardians, Armor Permutations: HERMES- Body Description "EVA-pattern prototype refitted for orbital raids. The Enhanced Mobility Subsystem embedded in the HERMES prototype is so powerful that only a handful of Spartans can use it safely."

List of armor permutations by game title

List of armor permutations in Halo 3
Bungie Armor • CQB • EOD • EVA • HAYABUSA • Mark V • Mark VI • ODST • Recon • Rogue • Scout • Security • Katana
MCC-exclusive Spartan armor
Air Assault • Aviator • COS • Compass • Deadeye • Demo • Hammerhead • Hivemind • Infiltrator • Lancer • Mirage • Navigator • Nomdagro • ODST (COMM • DEMO • HVY • TAC) • Pioneer • Rhine • Soldier • Suture • Tanker • Warrior
MCC-exclusive Elite armor
Fractures Spartan armor
List of armor permutations in Halo: Reach
Spartan armor
Air Assault • Commando • CQB • CQC • EOD • EVA • Grenadier • GUNGNIR • HAZOP • JFO • Mark V • Mark V[B] • Mark VI • Military Police • ODST • Operator • Pilot • Recon • Scout • Security • AKIS (MCC only) • Mariner (MCC only)
Spartan supplemental armor
Assault • Collar • FJ/PARA • Hard-point (HP) • Jump Jet restraints • Sniper • Tactical • Up-armored (UA) • GRD (MCC only) • EXO/TSCS (MCC only)
Elite armor sets
Fractures Spartan armor
Cut armor
List of armor permutations in Halo 4
Armor

Regular: Air Assault • Aviator • CIO • Commando • Deadeye • Defender • EOD • Enforcer • EVA • FOTUS • GUNGNIR • HAZOP • Infiltrator • Locus • Mark VI • Oceanic • Orbital • Protector • Raider • Ranger • Recon • Recruit • Scanner • Scout • Soldier • Strider • Vanguard • Venator • Warrior • War Master

Specialization: Engineer • Operator • Pathfinder • Pioneer • Rogue • Stalker • Tracker • Wetwork
Forearms/Legs
MCC-exclusive
Cut armor
List of armor permutations in Halo 5: Guardians
Achilles • Air Assault • Anubis • Argonaut • Argus • Athlon • Atlas • Aviator • Breaker • Buccaneer • CQB • Centurion • Challenger • Cinder • CIO • Commando • Copperhead • Cyclops • Cypher • Deadeye • Decimator • Defender • Dynast • EOD • Enforcer • Engineer • EVA (GEN1 and GEN2) • Fenrir • Foehammer • FOTUS • Freebooter • Goblin • GUNGNIR • Helioskrill • Hellcat • Helljumper • Hermes • Hunter • Icarus • Indomitable • Infiltrator • Interceptor • Intruder • Jumpmaster • Legionnaire • Locus • Mako • Marauder • Mark IV • Mark V (Alpha and Delta) • Mark VI (GEN1 and GEN2) • Maverick • Military Police • Nightfall • NOBLE • Nomad • Olive • Operator (GEN1 and GEN2) • Orbital • Pathfinder • Pioneer • Pilot • Protector • Raider • Raijin • Ranger • Reaper • Recluse • Recon (GEN1 and GEN2) • Recruit • Rogue • Scanner • Scout • Security (GEN1 and GEN2) • Seeker • Shinobi • Soldier • Stalker • Stinger • Strider • Teishin • Technician • Timmy • Tracer • Tracker • Valkyrie • Vector • Venator • Venture • Vigilant • Viper • Void Dancer • Warrior • War Master • Wetwork • Wrath
List of armor permutations in Halo Infinite
Spartan armor

Mark VII (Anubis • Armet • Aviator • Barrister • Brawler • Camazotz • Cavallino • Celox • Cestus • Courier • Deadeye • Dokkaebi • Enigma • Firefall • Flanker • Hawker • ISR • Kai-125 • Linebreaker • Mark V Zeta • Mark VI • Mark VI MOD • Mark VII • Menachite • Mercury • Rampart • Riz-028 • Rockeye • Security GEN3 • Soldier • Stormfall • Talon • Trailblazer • Trendlock • Torchbearer • Vannak-134 • Volant • War Master • Winterknight • Zvezda)
Mark V [B] (Air Assault • Commando • CQB • CQC • EOD • EVA • Grenadier • GUNGNIR • HAZOP • JFO • Mark V • Mark V [B] • Mark VI • ODST • Operator • Pilot • Recon • Scout • Security)
Rakshasa (AKIS II-GRD • Artaius • Bunyip • Cambion • Conqueror • Lechuza • Locus • Morrigan • Rakshasa • Rasetsu • Scorn • Shikari • Stribog • Taskmaster • Ullr • Viper)
Mirage IIC (Athlon • Balor • Belus • Erinyes • Extender • Mirage IIC • Neith • Nexus • Skymarcher • Squire • Street Viper • Tyro • Veles)
Hazmat (Ashmaw • Burrowlens • Farkas • Mark VI CBRN • Notus • Oberon • OSTEO • Ogun • Project CORSAC • Serket • Skarbnik • Steelheart • Temfor • Voidspear)

Mark IV (Ardent • Ärger • Emil • Isidor • Mark IV • Paladin • Theodor • Ulrich • Valiant • Wilhelm • Ypsilon • Zacharias)
Spartan armor accessories
AAP • FC • FCI • SAP • TAC • UA (Type FJ) • UTIL
Other
Fractures Spartan armor

Yoroi (Chonmage • Hakushika • Hikeshi • Kabuto • Kawari • Otomosho • Yokai)
Eaglestrike (Boggart • Brodie • Eaglestrike • Kerberos • Leadbelcher • M199X • Sky Marshal)

Chimera (Abatur • Chimera • Flenser • Fomorian • Geist • Grendel • Grimghast • Merrow • Mimir • Peaceweaver • Strigoi • Thresher • Wendigo)
For a complete list, check out our armor category.

List of armor permutations by generation

MJOLNIR Powered Assault Armor
Mainline armor generations
Mark I • Mark II • Mark III • GEN1 (Mark IV • Mark V • Black • Mark VI • Mark VII) • GEN2 • GEN3
Armor components
Competing and related projects
ARTAIUS • Buccaneer • COBALT • HAYABUSA • HRUNTING • MELAENO • Mirage • OSTEO • Rakshasa • Shinobi • SPI • YGGDRASIL
Armor permutations (by generation)
Supplemental equipment
GEN1
Marks
Variants
Air Assault • AKIS • Ardent • Ärger • Argus • B • Centurion • COBALT • Commando • CQB • CQC • Emil • EOD • EVA • Grenadier • GUNGNIR • HAYABUSA • HAZOP • Hoplite • Isidor • JFO • Mariner • Military Police • Mirage • MJOLNIR/Black • Paladin • ODST • Operator • Orbital • Pilot • Raider • Ranger • Recon • Rogue • Scout • Security • Strider • Theodor • Tracker • Ulrich • Valiant • Venator • Wilhelm • Ypsilon • Zacharias
GEN2
Mark variants
Mark IV (GEN2) • Mark V (GEN2 • Alpha • Delta) • Mark VI (GEN1 • GEN2 • MOD) • Mark VII (GEN2)
Variants originating from GEN1
Air Assault • Argus • Commando • Centurion • EOD • EVA • GUNGNIR • HAZOP • ODST • Operator • Orbital • Raider • Ranger • Recon • Rogue • Scout • Security • Strider • Venator
Variants based on GEN1
New variants
Achilles • Anubis • Argonaut • Athlon • Atlas • Aviator • Barvo • Breaker • Challenger • Cinder • CIO • Copperhead • Cyclops • Cypher • Deadeye • Decimator • Defender • Dynast • Enforcer • Engineer • Fenrir • Foehammer • FOTUS • Freebooter • Goblin • Helioskrill • Hellcat • Helljumper • Hermes • Hunter • Icarus • Infiltrator • Interceptor • Jumpmaster • KEYSTONE • Legionnaire • Locus • Mako • Marauder • Maverick • Mirmillion • Nightfall • Nomad • Oceanic • Oppressor • Pathfinder • Pioneer • Prefect • Protector • Raijin • Reaper • Recluse • Recruit • Ricochet • Scanner • Seeker • Soldier • Stalker • Stinger • Teishin • Technician • Tracer • Tracker • Valkyrie • Vanguard • Vector • Venture • Viper • Void Dancer • Warrior • War Master • Wetwork
Forearms/Legs
Other
For a complete list, check out our MJOLNIR armor category.

Navigation

Retrieved from "https://www.halopedia.org/index.php?title=EVA-class_Mjolnir&oldid=1601375"